VISTAQUEST JAPAN

You are here: Lineup

VQ1015 ENTRY

: For VQ beginners, Entry is highly recommended.
This model features a limb darkening function.
By downloading a firmware, you can take nostalgic black and white photos. We are also preparing for a firmware for taking blue enhanced photos.

Photo Gallery＞VQ1015ENTRY

Top
Product View
Specifications
Firmware

Basic Information

Product name	VQ1015ENTRY
Maximum recording pixels	2 megapixels
Price	Open price
Accessories	USB1.1 cable 1 Alkaline AAA battery User's guide
Color	Red, Black, Blue, Yellow Green, Pink, Cyan ※These three limited color versions are out of production.

※For more information, please refer to "Specifications."

△TOP

Model with built-in memory

Size/Dimensions (W x H x D)	60×20×38mm
Weight	15g
Effective Pixcels	1.3megapixels
Maximum Recording Pixels	2megapixels
Foucus	Fixed Focus
Lens	F3.0,f = 6.56mm
Monitor	Status LCD
Recording Pixels	【Still Image】Ｌ：1600×1200pixels M：1280×1024 Ｓ：640×480pixels
Recording Pixels	【Movie】 320×240pixels
Zoom	no
Shutter Speed	Auto
White Balance	Autyo
Self-timer	10seconds
Flash	no flash
Exposure	Auto
Built-in Memory	8MB SDRAM （4MB：Data Strage Area /4MB： System Strage Area )
Memory Slot	SD
Operating System	Microsoft Windows 2000／XP／Vista
Auto Power Off	60seconds
Power Source	1 Alkaline AAA battery (enelope compatible)

△TOP

model without built-in memory (serial №081112416～）

Size/Dimensions (W x H x D)	60×20×38mm
Weight	15g
Effective Pixcels	1.3megapixels
Maximum Recording Pixels	2megapixels
Foucus	Fixed Focus
Lens	F3.0,f = 6.56mm
Monitor	Status LCD
Recording Pixels	【Still Image】Ｌ：1600×1200pixels M：1280×1024pixels Ｓ：640×480pixels
Recording Pixels	【Movie】 320×240pixels
Zoom	no
Shutter Speed	Auto
White Balance	Auto
Self-timer	10seconds
Flash	no flash
Exposure	Auto
Memory Slot	SD
Operating System	Microsoft Windows 2000／XP／Vista
Auto Power Off	60seconds
Power Source	1 Alkaline AAA battery (enelope compatible)

△TOP

VQ1015ENTRY Firmware is available to download.
Follow the simple directions below! With this firmware, you can take very unique photos including photos in black and white or vivid photos.
Warning!: This firmware is for VQ1015 ENTRY only. If it was used with other models, it might cause a malfunction and damage.

Default firmware
VQ1015 ENTRY　0727 Firmware	For the model with built-in memory
	For the model without built-in memory

For taking photos in black and white
VQ1015 ENTRY　0612 Firmware	For the model with built-in memory
	For the model without built-in memory

For 1120 x 1024 photos/movies with color modes (Still image: Color, B&W, and Sepia; Movie: Sepia and B&W).
VQ1015 ENTRY　0906 Firmware	For the model without built-in memory

※The firmware cannot be replaced while SD card is kept inserted into the camera. Please take out SD card before you start to download regardless of the model with or without built-in memory.

※When replacing firmware, please take full responsibility for your own actions. We are not responsible for any defects or malfunction due to the replacement.

※The firmware of VQ1015 ENTRY without built-in memory is a different type of that of the model with built-in memory. Using a mismatched firmware might cause a malfunction and damage your camera.

※The firmware is a zip file. If you don’t have a decompression utility installed on your computer, please obtain an appropriate utility to accommodate your computer through the Internet.

Please use a new battery.

If the battery runs out in the middle of the download, it might cause a malfunction and damage your camera.

Make sure the “100 IMAGE” folder is empty. In case you have images in the folder, save them in a different location and make the folder empty.

You may disconnect the usb cable from the camera and computer without closing the “100IMAGE” folder or using the “safely remove hardware” function.
The beep sound might be subtle. Please listen carefully.

※Please repeat above the installation from step 1 if you don’t hear the beep sound.